KANDEA 6 cm paving stone - ORSOL

The 6 cm Kandéa paving stone offers the same decorative and aesthetic qualities as the 3 cm version, with enhanced durability that makes it suitable for use on driveways in private homes.

Its Indian Kandla appearance and varied laying patterns — fans, rosettes, peacock tails or half-moons — offer exceptional decorative potential, whether you opt for the understated Grey or the rich colours of Multicolor.

Laying on sand The bedding layer, 3 to 4 cm thick, is levelled with a straight edge before the pavers are laid. The joints between each paving stone are 10 mm wide, filled with sand or stabilised sand. The substrate must have a minimum gradient of 1.5% to ensure water drainage. Sand and gravel must comply with standard NF EN 13242.

Adhesive laying The pavers are laid using a double-layer adhesive on a cement-based substrate (in accordance with NF DTU 52.2), with a consumption of 5 kg/m² of standard-consistency adhesive mortar. The 10 mm joints are filled with a jointing mortar compliant with standard NF EN 13888. The substrate must have a minimum gradient of 1.5%.

Suitable for installation in areas subject to vehicle traffic in private residences. Frost-resistant, non-slip, suitable for all architectural styles from contemporary to traditional.

In France, this product is sold exclusively through one of our distribution partners. For France, please contact us for details of stockists.